Tools inspection checklist used to inspect hand and power tools for damage such as cracked blades, frayed cords, worn handles, or loose parts. A daily tools inspection checklist assures that tools inspections are carried out regularly and properly. By doing so, maintenance costs are minimized and workplace accidents are avoided.
Preventative maintenance costs much less than repairs.
Effective tools inspection checklist ensures that problems are detected before
they become worse. Also, with daily inspection, most of your tool problems
that need repair would be detected in time. This avoids more complex and
expensive repairs.
It also tells you which parts need adjustment. But for tools that may pose a risk to the health
and safety of your personnel, a deeper and more thorough inspection is
necessary. But without a tools inspection checklist, many problems can go
unnoticed or unreported.
.jpg "Tools inspection checklist") |
| Tools inspection checklist |
What is a tools inspection checklist?
The checklist also called the verification sheet, checklist,
inspection sheet, and control sheet is a generally printed format used to
collect data by observing a specific situation or process. Using faulty tools
can make problems worse. Documenting your inspections using the tools
inspection checklist ensures that you are doing it correctly and that you have
checked every piece of equipment.
A tools inspection checklist documents the condition of your
equipment through verification. Provides a report of any repairs needed to
ensure everything is running. Those who have responsibility for maintaining
equipment must ensure that everything is thoroughly inspected.
Why is the inspection of tools important?
Daily tools inspections encourage workers to take better
care of the tools they use. Workers can be careless and rough with the tools
they use. Requiring a documented review via a Tools Inspection checklist
ensures that your workers will take responsibility once they use the tools.
Without a proper inspection, you won't know who is
responsible for problems that occur with your tools. By requiring daily
inspections and reports, it will be clear when the problem occurred and who is
responsible.
Furthermore, psychological science confirms that the more
attention you pay to something, the more you take care of it. Daily pre-use
inspections make your worker pay more attention and care about the tools. This
will encourage them to handle the tools more carefully, causing less wear and
tear.
Inspection of construction tools is an essential process for supervisors and construction workers. A daily inspection ensures that the tools used on the site are in good working order.
For more health and safety topics, visit: Safety Zone
Related safety-related documents:
How do you inspect a tool?
In safety, the inspection of tools is one of the main activities that must be carried out before starting to carry out the work. A good inspection can be key when seeking to reduce accidents and incidents at work. What parts should be reviewed in an inspection:
- Handles
- Discs, sharp elements, rotating and moving parts
- The electrical cord, extension, and plug
- Buttons or push buttons to turn the power tool on, off, or locked
- Safety guards or protective devices
Recommendations for a good inspection
· Inspect power tools while they are not plugged in to prevent inadvertent starting or starting. If the tool is in common use, it is recommended to consult those who reported the tool on the failures or problems that the tool presented during its use.
· After the inspection, unsafe conditions detected must be reported to continue with the activity. If tools are found in good condition, must color code for serviceability.
Hand and power tools checklist sample
.jpg)
Reviewed by Munir Ahmad
on
March 17, 2023
Rating:
.jpg "Flagman training")
.webp "Fire watch training PPT")